Our all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar’s flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories. Add it all up and it’s a great upgrade for adventure riders after a modern-fit road bar.
This is a carousel. Click Next/Previous buttons or a slide dot button to jump to a slide.
Spano
Drop
Handlebar
Spano
Drop
Handlebar
Spano Drop Handlebar
| Bar Width (center-to-center at the hoods) | 40 cm |
|---|---|
| Compound Flare | 12 degrees at the hoods and 20 degrees through the drops |
| Drop | 100 mm |
| Reach | 68 mm |
| Clamp Diameter | 31.8 mm |
| ASTM Rating | Condition 3 |
| Material | Carbon |
| Part Number | HB0365 |
| Compatibility | Di2 compatible with bar end junction for 1x drivetrain setups |
| Note | Bar width is 6cm wider when measured center-to-center at the drops |
| Bar Width (center-to-center at the hoods) | 42 cm |
|---|---|
| Compound Flare | 12 degrees at the hoods and 20 degrees through the drops |
| Drop | 100 mm |
| Reach | 68 mm |
| Clamp Diameter | 31.8 mm |
| ASTM Rating | Condition 3 |
| Material | Carbon |
| Part Number | HB0361 |
| Compatibility | Di2 compatible with bar end junction for 1x drivetrain setups |
| Note | Bar width is 6cm wider when measured center-to-center at the drops |
| Bar Width (center-to-center at the hoods) | 44 cm |
|---|---|
| Compound Flare | 12 degrees at the hoods and 20 degrees through the drops |
| Drop | 100 mm |
| Reach | 68 mm |
| Clamp Diameter | 31.8 mm |
| ASTM Rating | Condition 3 |
| Material | Carbon |
| Part Number | HB0362 |
| Compatibility | Di2 compatible with bar end junction for 1x drivetrain setups |
| Note | Bar width is 6cm wider when measured center-to-center at the drops |
| Bar Width (center-to-center at the hoods) | 46 cm |
|---|---|
| Compound Flare | 12 degrees at the hoods and 20 degrees through the drops |
| Drop | 100 mm |
| Reach | 68 mm |
| Clamp Diameter | 31.8 mm |
| ASTM Rating | Condition 3 |
| Material | Carbon |
| Part Number | HB0363 |
| Compatibility | Di2 compatible with bar end junction for 1x drivetrain setups |
| Note | Bar width is 6cm wider when measured center-to-center at the drops |
| Bar Width (center-to-center at the hoods) | 48 cm |
|---|---|
| Compound Flare | 12 degrees at the hoods and 20 degrees through the drops |
| Drop | 100 mm |
| Reach | 68 mm |
| Clamp Diameter | 31.8 mm |
| ASTM Rating | Condition 3 |
| Material | Carbon |
| Part Number | HB0364 |
| Compatibility | Di2 compatible with bar end junction for 1x drivetrain setups |
| Note | Bar width is 6cm wider when measured center-to-center at the drops |